Product ID:N-1065 ADHESIVE (REPAIR KIT, SEE SUPP-NONHA
MSDS Date:01/01/1985
FSC:4220
NIIN:00-694-1410
Kit Part:Y
MSDS Number: BFLWW

SHORE-UBS CHEMICAL CO

100 MAIN ST
ALLENHURST, NJ 07711-1131
US

Cage: 31711

SHORE-UBS CHEMICAL CO INC

ALLENHURST, NJ 07711-1131 US

Telephone: 201-531-7300

Cage: 31711

PIGMENTS

Fraction By Weight: 2%

VEHICLE(TYPE NOT SPECIFIED)

Fraction By Weight: 16%

NAPHTHAS & KETONES

Fraction By Weight: 75%

ACGIH TLV: 300 PPM

RESIN

Fraction By Weight: 7%

Effects of Overexposure:MAY CAUSE NAUSEA AND/OR NARCOSIS:SKIN/EYE
CONTACT MAY CAUSE IRRITATION.

First Aid:INHALED:REMOVE TO FRESH AIR. GIVE CPR OR OXYGEN IF NEED
(CAUTION:CPR MAY EXPOSE RESCUER)EYES/SKIN: FLUSH W.WATER 15 MIN.
REMOVE CONTAMINATED CLOTHES.KEEP WARM/QUIET. GET MEDICAL ATTENTION

Flash Point:<20F/-6.7C CC
Lower Limits:1.2
Upper Limits:11.5
Extinguishing Media:CO*2, FOAM, DRY CHEM TRICHLORETHANE.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:EXTREMELY FLAMMABLE CONTAINER MAY
EXPLODE.VAPOR IS EXPLOS HAZARD.VAPOR MAY SPREAD AWAY FROM SPILL.

Spill Release Procedures:ELIMINATE IGNITION SOURCES.EVACUATE
AREA.VENTILATE SPILL AREA.ABSORB SPILL WITH SAND,EARTH
VERMICULITE,OIL-DRI,OR SOL SPEED-DRI.SHOVEL ABSORBENT MIXTURE INTO
STEEL CONTAINER AND COVER.

Handling and Storage Precautions:STORE IN APPRVD SOLVENT STORAGE
AREA.KEEP CONTAINERS CLOSED.AVOID IGNITION SOURCES.PROTECT FROM
PHYSICAL DAMAGE.MAINTAIN STRICT CHEMICAL HYGIENE.

Respiratory Protection:WEAR SCBA,IN FIRE, OTHERWISE NIOSH APPRVD RESPIR
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
AS OF 31OCT86, MIL-R-16417J NO LONGER INCLUDES AN ADHESIVE. THEREFORE,
A MSDS IS NO LONGER REQUIRED AFTER THAT DATE. THE MIL SPEC
MIL-A-5540 IS FOR THE ADHESIVE THAT WAS INCLUDED IN THE KIT FOR
MIL-R- 16417J.

HCC:N1
Boiling Pt:B.P. Text:152F/66.7C
Vapor Pres:29
Vapor Density:UNK
Spec Gravity:0.84
Evaporation Rate & Reference:6(BU.AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OFF-WHITE,SWEET,RUBBERY,MOTH BALL ODOR.
Percent Volatiles by Volume:81

Stability Indicator/Materials to Avoid:YES
AVOID PEROXIDES, OTHER OXIDIZERS
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:OXIDES OF CARBON,ZINC,MAGNESIUM AND
CHLORINE GAS.

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.